How to use
Weighing and mixing
The mixing ratio of Artoflex composite is two parts mineral powder and one part acrylic resin. They must be weighed carefully. First, fill a bucket with the amount of acrylic resin needed to make the desired quantity. Use a spatula to mix and create a swirl in the resin. Then, add the necessary amount of mineral powder, and mix for 30 seconds or more. The mixture is ready when it is smooth. Make sure no material sticks to the bucket.
The time required for the elements to react after mixing them is approximately 20 minutes. Using additives can shorten or lengthen the reaction time.
Residual humidity must evaporate to obtain all of Artoflex composite’s properties. Curing time strongly depends on external factors, such as dimensions of objects, temperature and humidity. Objects can be carefully removed from the mould as soon as they are strong enough to cope with external forces. The drying process finishes when objects are outside the mould.
Equipment must be cleaned immediately after being used. It is strongly recommended to clean your equipment in a bucket of water instead of a sink, as the hardening process continues under water.
If you have any questions about our product, contact us at firstname.lastname@example.org
We will be happy to answer them.